Old brand manufacturer CW630 horizontal lathe, 30 lathe pricLocation:Index > Technical Support >

Old brand manufacturer CW630 horizontal lathe, 30 lathe pric

Time:2017-03-07 10:54 Source:www.jiagongzhongxin168.cn Author:Lathes

CW630 lathe
Old brand manufacturer CW630 horizontal lathe, 30 lathe price,Switch on the machine tool spindle drive: Old brand manufacturer CW630 horizontal lathe, 30 lathe price,turret head after clamping, signal switch, switch on the solenoid valve, the control pressure oil into the hydraulic cylinder, a compression spring, the gear meshing gear and the main shaft, thus change the knife action completed, can enter the normal processing. Milling machines,LathesReplacement of the main shaft for the knife, eliminating the need for automatic loosening, unloading knife, knife and tool handling a series of complex operations, so as to shorten the tool change time, and improve the reliability of the knife. CAK61125 CNC lathe,However, due to the limitation of the space position, the structural dimensions of the spindle components can not be too large, and the rigidity of the spindle system is affected. In order to ensure the rigidity of the spindle, the number of spindles must be limited. Therefore, the turret spindle head is usually only suitable for less process, the accuracy of the machine is not too high, such as CNC drilling machine, milling machine, etc.. Some CNC machine tools, Old brand manufacturer CW630 horizontal lathe, 30 lathe price,such as the combination of machine tools, the use of multi spindle spindle box, the use of replacement of the main box to achieve the purpose of changing the knife.Can be customized according to customer requirements:
Specification model   CW6263Lathe CW630Lathe
Maximum rotary diameter of machine tool body mm 630
Old brand manufacturer CW630 horizontal lathe, 30 lathe price,Maximum rotary diameter of the tool carrier mm 350
Maximum length of workpiece mm 750,1500,2000,3000-15000
Rotary diameter / effective width in saddle groove mm 800/300
Diameter of the through hole of the main shaft and its shaft head type mm 104; D11 (B Series) 130; D11 (C Series)
Spindle through hole of the front end of the cone and the top  taper mm Phi 120 (B Series) Phi 140 (C Series) Morse No. 5
spindle speeds and speed rang r/min 18 kinds of 7.5-1000 (B Series)
18 kinds of 8.5-800 (C Series)
Longitudinal feed rate and range mm/r 64 kinds of 0.05-24.3
Range 1:1 mm/r 0.1-1.52
Range value 16:1 mm/r 1.6-24.3
Micro feed range of exchange gear for machine tool mm/r 0.05-0.76
The value of the horizontal feed rate than the longitudinal feed   1/2
Bed saddle fast moving speed mm/min 4000
Old brand manufacturer CW630 horizontal lathe, 30 lathe price,Lead screw pitch mm 12 (Metric) 1/2 "(inch)
Metric thread type, range mm 50 kinds of 1-240 (another 14 non-standard thread)
Number and range of withworth thread   26 kinds of t.p.i 14-1
Modulus thread type, range mm 53 kinds of 0.5-120
The machine diametral threads number and range   24 kinds of DP 28-1
The maximum horizontal stroke of the lower tool post mm 315
The maximum travel of the upper tool carrier mm 200
Tail sleeve stroke mm 250
Tail sleeve taper   Morse No. 5
The bed rail width and its quenching hardness mm 550RC52
Main motor power kW 11
Fast motor power kW 1.1
Cooling pump motor power w 90
Machine tool width * height / width * height mm 1380×1450
Length of machine tool length / packing box    
Maximum length of workpiece    
750 mm 2890/3440
1500 mm 3690/4240
2000 mm 4070/
30000 mm 5190/5740
4000 mm 6120/6640
5000 mm 7200/7750
Machine tool net weight    
Maximum length of workpiece    
750 mm 3400/4400
1500 mm 3700/4700
2000 mm 4200/
3000 mm 4700/5900
4000 mm 5800/7700
5000 mm 6800/8800
Old brand manufacturer CW630 horizontal lathe, 30 lathe price,The width of the bed mm 550
Max capacity kg 2000
Quality:The casting of the workpiece is performed by the gb9439-88 standard,Tempering treatment method,The hardness of the guide rail reaches HRC52,High frequency quenching process,The gear is made of hardened steel.after-sale service:Three packages in accordance with national standards,According to the national standard implementation of three packs of standards, repair, replacement or return.Source from:www.jiagongzhongxin168.cn