Manufacturers spot direct CW6163/CW6263 horizontal lathe priLocation:Index > Technical Support >

Manufacturers spot direct CW6163/CW6263 horizontal lathe pri

Time:2017-03-28 11:17 Author:Lathes

CW6163 lathe
Manufacturers spot direct CW6163/CW6263 horizontal lathe price,As the control of CNC machine tools are mostly used I/O interface to control each other,Manufacturers spot direct CW6163/CW6263 horizontal lathe price, the use of the interface of the machine tool parts of the I/O interface signal analysis, you can find the fault location. The fault diagnosis of the whole process can be summarized as the interface signal method: analysis of a fault phenomenon to determine fault fault alarm range (range) using a logic analysis method of interface signal to determine the fault point and troubleshooting. This method accords with the principle of design and debugging of the system. It is simple to use and easy to master. Milling machines,LathesTherefore, this method plays an important role in the maintenance of CNC system. Self diagnosis technology:X63W milling machine, the so-called self diagnosis refers to the ability of fast data processing by computer internal numerical control system, signal acquisition and processing of multi-channel and fast error of system, then the logic analysis by diagnostic procedures, Manufacturers spot direct CW6163/CW6263 horizontal lathe price,to determine whether the system is faulty, and to locate the faults.Can be customized according to customer requirements:
Specification model   CW6263Lathe CW630Lathe
Manufacturers spot direct CW6163/CW6263 horizontal lathe price,Maximum rotary diameter of machine tool body mm 630
Maximum rotary diameter of the tool carrier mm 350
Maximum length of workpiece mm 750,1500,2000,3000-15000
Rotary diameter / effective width in saddle groove mm 800/300
Diameter of the through hole of the main shaft and its shaft head type mm 104; D11 (B Series) 130; D11 (C Series)
Spindle through hole of the front end of the cone and the top  taper mm Phi 120 (B Series) Phi 140 (C Series) Morse No. 5
spindle speeds and speed rang r/min 18 kinds of 7.5-1000 (B Series)
18 kinds of 8.5-800 (C Series)
Longitudinal feed rate and range mm/r 64 kinds of 0.05-24.3
Range 1:1 mm/r 0.1-1.52
Range value 16:1 mm/r 1.6-24.3
Micro feed range of exchange gear for machine tool mm/r 0.05-0.76
The value of the horizontal feed rate than the longitudinal feed   1/2
Bed saddle fast moving speed mm/min 4000
Lead screw pitch mm 12 (Metric) 1/2 "(inch)
Metric thread type, range mm 50 kinds of 1-240 (another 14 non-standard thread)
Number and range of withworth thread   26 kinds of t.p.i 14-1
Modulus thread type, range mm 53 kinds of 0.5-120
Manufacturers spot direct CW6163/CW6263 horizontal lathe price,The machine diametral threads number and range   24 kinds of DP 28-1
The maximum horizontal stroke of the lower tool post mm 315
The maximum travel of the upper tool carrier mm 200
Tail sleeve stroke mm 250
Tail sleeve taper   Morse No. 5
The bed rail width and its quenching hardness mm 550RC52
Main motor power kW 11
Fast motor power kW 1.1
Cooling pump motor power w 90
Machine tool width * height / width * height mm 1380×1450
Length of machine tool length / packing box    
Maximum length of workpiece    
750 mm 2890/3440
1500 mm 3690/4240
2000 mm 4070/
30000 mm 5190/5740
4000 mm 6120/6640
5000 mm 7200/7750
Machine tool net weight    
Maximum length of workpiece    
750 mm 3400/4400
1500 mm 3700/4700
2000 mm 4200/
3000 mm 4700/5900
4000 mm 5800/7700
5000 mm 6800/8800
Manufacturers spot direct CW6163/CW6263 horizontal lathe price,The width of the bed mm 550
Max capacity kg 2000
Quality:The casting of the workpiece is performed by the gb9439-88 standard,Tempering treatment method,The hardness of the guide rail reaches HRC52,High frequency quenching process,The gear is made of hardened steel.after-sale service:Three packages in accordance with national standards,According to the national standard implementation of three packs of standards, repair, replacement or return.Source